Copyright © Shandong Master Machinery Group Co.,Ltd. ICP:14037755号-5 Jining Master Machinery Research Institute
YO18 hand-held air leg rock drill
YO18 hand-held air leg rock drill
1.Introduction of YO18 Hand-held Air Leg Rock Drill
YO18 hand-held air leg rock drill is used for drilling rock blasting and other rock drilling work in quarries, small mines and other engineering constructions. It is suitable for drilling blasting holes below the horizontal and vertical tilting on medium hardness and hard rock. After equipped with FT100 type air leg, it can drill holes of different orientations and angles. The drill hole diameter is 36-42 mm, and the hole depth is 1.5-2 m.
2.Parameters of YO18 Hand-held Air Leg Rock Drill
Weight |
18 |
kg |
Length |
550 |
mm |
Cylinder diameter |
58 |
mm |
Piston stroke |
45 |
mm |
Air pipe inner diameter |
19 |
mm |
Water pipe inner diameter |
8 |
mm |
Shank diameter |
22*108 |
mm |
Using air pressure 3.9*105Pa/hour: |
||
Air consumption |
<1.2 |
m³/min |
Average rock drilling speed |
80 |
mm |
Using air pressure 4.9*105Pa/hour: |
||
Impact energy |
24.5 |
j |
Air consumption |
≤1.35 |
m³/min |
Average rock drilling speed(F<14 Bit¢36) |
120 |
mm |
FY200 type oiler |
||
Weight |
≤1.2 |
kg |
Oil storage |
200 |
ml |
FT100 type air leg |
||
Weight |
≤11 |
kg |
Propulsion length |
810 |
mm |
Bore diameter |
52 |
mm |
Leg length |
1312 |
mm |
Note: The product is continuously improved, and subject to change without notice, please refer to the actual product.
PRODUCTS
Address: Jining High-tech Zone,
Shandong Province, China
Tel: +86-537-2335787
Fax: +86-537-2335786
Business phone: 18266770909
Email: sales@huaxiamaster.com
Web: www.huaxiamaster.com
CONTACT US