YSP45 upward high frequency rock drill

1.IntroductionofYSP45upwardhighfrequency rockdrillYSP45upwardhighfrequency rockdrillismainlyusedformining,shaftexcavationandrockdrillingintheexcavationofthepatio.Itcandrillupwardsinthe60°to90°directionofthegroundandcanalsobeusedtoinstallanchors.2. Parameters ofYSP45upwardhighfrequency rockdrillWeight44(kg)Dimensions1420*390*160(mm)Borehole diameter95(mm)Pistonstructurestroke47(mm)Airlegpropulsionstroke750(mm)Airlegcylinderinnerdiameter74(mm)Workingpressure0.4-0.63(mpa) Impactenergy≥73.5(0.63mpa)≥70(0.5mpa)≥57(0.4mpa)(j) Rockdrillinggasconsumption ≤113.3(0.63mpa)≤83(0.5mpa)≤80(0.4mpa)(l/s) Rockimpactfrequency ≥46(0.63mpa)≥45(0.5mpa)≥42(0.4mpa)(hz) Torque≥21(0.63mpa)≥18(0.5mpa)≥15(0.4mpa)(n·m)waterpressure0.3(mpa)Airpipeinnerdiameter25(mm)Waterpipeinnerdiameter13(mm)Suitabledrillingdiameter34-42(mm)Suitableformaximumrockdrillingdepth6(m)Operatingtemperature—30~50(℃)Braketailspecification22*108(mm)FY500Atypeoilerweight2.5(kg)Oilcontent500(ml)

Keywords:

产品描述

  • 产品描述
    • Commodity name: YSP45 upward high frequency rock drill

    1.Introduction of YSP45 upward high frequency rock drill

    YSP45 upward high frequency rock drill is mainly used for mining, shaft excavation and rock drilling in the excavation of the patio. It can drill upwards in the 60° to 90° direction of the ground and can also be used to install anchors.

    2. Parameters of YSP45 upward high frequency rock drill

    Weight

    44

    (kg)

    Dimensions

    1420*390*160

    (mm)

    Borehole diameter

    95

    (mm)

    Piston structure stroke

    47

    (mm)

    Air leg propulsion stroke

    750

    (mm)

    Air leg cylinder inner diameter

    74

    (mm)

    Working pressure

    0.4-0.63

    (mpa)

    Impact energy

    ≥73.5(0.63mpa)

    ≥70(0.5mpa)

    ≥57(0.4mpa)

    (j)

    Rock drilling gas consumption

     

    ≤113.3(0.63mpa)

    ≤83(0.5mpa)

    ≤80(0.4mpa)

    (l/s)

    Rock impact frequency

     

    ≥46(0.63mpa)

    ≥45(0.5mpa)

    ≥42(0.4mpa)

    (hz)

    Torque

     

    ≥21(0.63mpa)

    ≥18(0.5mpa)

    ≥15(0.4mpa)

    (n·m)

    water pressure

    0.3

    (mpa)

    Air pipe inner diameter

    25

    (mm)

    Water pipe inner diameter

    13

    (mm)

    Suitable drilling diameter

    34-42

    (mm)

    Suitable for maximum rock drilling depth

    6

    (m)

    Operating temperature

    —30~50

    (℃)

    Brake tail specification

    22*108

    (mm)

    FY500A type oiler

    weight

    2.5

    (kg)

    Oil content

    500

    (ml)

    Note: The product is continuously improved, and subject to change without notice, please refer to the actual product.

Product Message

Product Recommendation