SDZ-30S Pneumatic Mountain Geophysical Drilling Rig
Keywords:
Categories:
产品描述
- 产品描述
-
- Commodity name: SDZ-30S Pneumatic Mountain Geophysical Drilling Rig
1. Brief introduction of SDZ-30S pneumatic mountain geophysical drilling rig
SDZ-30S pneumatic mountain drilling rig is developed by Shandong Master Machinery Group Co.,Ltd combined with our company’s years of geophysical exploration drilling rig experience and the integration of foreign excellent mountain rig. SDZ-30 pneumatic mountain drilling rig is a upgraded version mountain drilling rig. The rig has a optimization design and is a cost-effective product with great value. The SDZ-30S pneumatic mountain drilling rig can meet the construction requirements of air shock drilling and so on; so it can adapt to different geological environments. The SDZ-30S pneumatic mountain drilling rig geophysical drilling rig is now widely used in the mountainous, jungle, hills, gobi, loess plateeu, seasonal farmland and other complex areas without water source, such as oil and gas seismic exploration, field investigation, geological structure investigation and other drilling engineering construction work.
2. Features of SDZ-30S pneumatic mountain geophysical drilling rig
(1)Light weight modular design is adopted for quick disassemble and assemble for easy handling.
(2)The drilling rig and drill frame are strengthened and reinforced, which are more earthquake resistant and longer lasting.
(3)The front end of the base is designed with two sets of screw support, and the drill rig is more stable when drilling.
(4)Adopt a new and optimized hydraulic system, with higher efficiency and better control.
(5)The hydraulic oil tank is made by sheet metal process to reduce weld seam and use oil leakage for a long time.
(6)Lengthening the tubing between the hydraulic pump station and the operation table can achieve 3 meters outside operation.
(7)The screw type air compressor has the advantages of low energy consumption, low noise, high quality, stable exhaust pressure and low failure rate.
3. Technical parameters of SDZ-30S pneumatic mountain geophysical drilling rig
Model
SDZ-30S
Capability
Drilling mode
air shock drilling
Borehole diameter
mm
76
Drilling depth
m
30
Drilling pipe diameter
mm
60*1500
Stroke
mm
1850
Hydraulic pump
Gasoline engine power
hp
35
Rated pressure
mpa
20
Rated flow rate
l/min
60
Power
Torque
n.m
1000
Rotating speed
r/min
0-140
Lifting system
Rated pressure
kn
7.5
Rated lifting power
kn
15
Speed of lifting
m/s
0.77
Screw air compressor
Gasoline engine power
hp
35
Displacement
m³/min
35
Discharge pressure
mpa
0.8
4. Configuration list of SDZ-30S pneumatic mountain geophysical drilling rig
Name
Unit
Quantity
Remark
Base assembly
set
1
It includes chassis, leg and ball screw support
Drill stand assembly
set
1
It includes diagonal member, mast, chain wheel, chain, lifting motor, rotary motor and intake hole
Power of pump station assembly
set
1
It includes frames, engines, belt pulley and belts
Pump station assembly
set
1
It includes frame, hydraulic oil pump, hydraulic oil tank, hydraulic oil pipe and radiator.
Hydraulic oil tube
set
1
It includes hydraulic oil tube and connector
Operating station
set
1
It includes frame, balance valve, control valve, operating handle and throttle valve
Air compressor power assembly
set
1
Contains frames, engines, pulleys, belts
Screw air compressor
set
1
It includes frame, air compressor and radiator
Conveyor belts
plate
1
It is used to connect air compressor and drilling rig.
60 drill pipe
m
30
1.5m/pc
Impactor
branch
1
70
Impact bit
per
1
76
Note: The product is continuously improved, and subject to change without notice, please refer to the actual product.
Key words:- SDZ-30S
- Pneumatic Mountain Geophysical Drilling Rig
- SDZ-30S Pneumatic Mountain Geophysical Drilling Rig
Product Message
Product Recommendation